1658-A00-00-P10-6A ETA Thermal circuit breaker

Single-pole, thermal circuit breaker in small design with threaded neck mounting.

Reliable switching behaviour due to snap-action contact. When the circuit breaker is triggered, a white

Button becomes visible. Complies with the appliance circuit breaker standard EN 60934 (IEC 600934): R-type, TO.

For more detailed explanations, see: www.e-t-a.de/ti_d

Rated voltage AC 240 V; DC 28 V
Rated current range 5...30 A
Service life AC + DC:
5...16 A - 1 000 switching cycles with 2 x IN, inductive
17...25 A - 1 000 switching cycles with 2 x IN, ind.arm

Rated switching capacity (EN 60934; test series D)
Switching cycles IN UN
40 5...16 A AC 240 V 6 x IN inductive
40 5...16 A DC 28 V 4 x IN ind.
40 17...25 A AC 240 V 120 A ind. arm
40 17...25 A DC 28 V 120 A ind. arm

Ambient temperature -20...60 °C
≤ 7 A -20...40 °C

Insulation coordination (IEC 60664)
2.5 kV/2 reinforced insulation in the actuating range

Dielectric strength actuating range
Test voltage AC 3 000 V

Insulation resistance > 100 MΩ (DC 500 V)

Switching capacity Icn
5...7 A 180 A
8...30 A 200 A

Switching capacity (UL 1077) IN UN
5...16 A AC 240 V 1 000 A, C, 1
5...30 A AC 125 V 2 000 A, C, 1
5...30 A DC 32 V 2 000 A, C, 1
5...30 A AC 125 V DC 28 V 2 000 A, C, 1 (1658-A...)

Degree of protection (IEC 60529) Actuation range IP40
Connection range IP00

Vibration resistance 8 g (57-500 Hz) ± 0.61 mm (10-57 Hz),
Test in accordance with IEC 60068-2-6, test Fc,
10 frequency cycles/axis

Impact resistance 30 g (11 ms)
Test in accordance with IEC 60068-2-27, test Ea

Corrosion resistance 96 hours in 5 % salt spray, test according to IEC 60068-2-11, test Ka

Moisture test 240 h 95 % rel. humidity, test according to IEC 60068-2-78, test Cab

Mass approx. 16 g